Manufacturing Tips: Five Casting Technologies To Consider For Your Design

Who among us doesn’t just love molded rubber products! Think about it for a minute and then try to imagine back to when you were a very young child. Now do you remember what your favorite toys were made from back then in your early years? Thats right! You guessed it! They were all made from some type of rubber!

22KW ~ 37KW AC servo motor – This is one of the high voltage servo meters. It runs at high power and high voltage power. This is used for China Custom Mold Maker, packing, steel processing and in servo press.

I was thinking about building “card houses” out of playing cards. I thought “wouldn’t it be great if there were some way to build things out of playing cards so they would not collapse so readily?”. I went out to the garage and after looking around a bit at all the crap on my work bench, I spied a piece of 3/8 inch diameter plastic tubing. I cut off several 3/4 inch long pieces of the tubing, and cut down into the end of the tubing with a razor blade, making four slits about 1/4 inch deep in each end of the tubing spaced equally around the openings.

Now you have a tree which is ready for alloy to be poured in. This is a gravity fed process which is suitable for a wide variety of alloys – ferrous and non-ferrous. Investment casting gives you a very precise casting with a very smooth finish. It is excellent for making parts that weigh less than 10 lbs.

These underground conduits are made of plastic and after a few big trucks drive over the area they often develop cracks. When it rains the water seeps into the conduits through the cracks and drains into the vaults. The seal is to prevent the vaults from filling up with water.

Among personalized golf gift items, I admit the golf balls are my favorite. Simple, standard 2-piece golf balls usually come in 18-packs and are relatively inexpensive. The cost of golf balls may seem small in comparison to the overall cost of pursuing the sport but the inexperienced golfer can go through a lot of golf balls in a very short space of time!

One of the greatest threats to the chairs patio furniture is water. Since we will be outdoors, going to have to deal with a lot of water. Depending on where you live will have much to do with how big of a threat, the water will be out of their chairs. For example, if you live in the south, where rain falls regularly and there is the threat of hurricanes, you need chairs that can cope with water damage more than they do in a dry state like Arizona.

It just seems that the more one learns about molded rubber products the more one grows to love them! In fact you can even buy easy to mix liquid polymer rubber that you can use to make your own molded rubber products in your own home.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts



Manufacturing Tips: Five Casting Technologies To Consider For Your Design

Contact Us

778 Callison Lane, Philadelphia, DE , 19146

Call Us: 302-444-4426

Consultation Banner

Get Free Estimation

Contact Form